Blazer 2WD V6-4.3L VIN X (2004)
2. Remove the cable (2) from the slot (1) on the rear seat release latch.
3. Remove the rear seat release latch.
INSTALLATION PROCEDURE
1. Position the rear seat release latch on the seat back.
2. Install the cable (2) in the slot (1) on the rear seat release latch.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the rear seat release latch (2) to the seat back with the 2 mounting screws (1).
Tighten
Tighten the rear seat back release latch screws to 2 N.m (18 lb in).