Blazer 2WD V6-4.3L VIN X (2004)
1. Install the center vent grille panel to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws that secure the center vent grille panel to the cowl.
Tighten the screws to 1.5 N.m (13 lb in).
3. Install the push-pin retainers securing the center vent grille panel to the cowl.
4. Install the right and the left vent grille end panels to the cowl.
Tighten the screws to 1.5 N.m (13 lb in).
5. Install the screws securing the securing the right and the left vent grille ends to the cowl.
6. Install the windshield wiper arms.