Blazer 2WD V6-4.3L VIN X (2004)
Brake Caliper: Service and Repair
Brake Caliper Replacement - Rear
Brake Caliper Replacement - Rear
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Remove the tire and wheel assembly.
3. Remove the brake hose to brake caliper bolt.
Important: The gaskets may be stuck to the brake caliper and/or the brake hose end.
4. Discard the metal gaskets.
5. Plug the opening in the front brake hose with a rubber plug in order to prevent brake fluid loss and contamination.
6. Remove the caliper guide pin bolts.