Blazer 2WD V6-4.3L VIN X (2004)
5. Using J26267, install the front caliper piston boot..
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the bleeder valve.
Tighten the bleeder valve to 12 Nm (110 inch lbs.).
Brake Caliper Overhaul - Front (Dual Piston)
Brake Caliper Overhaul - Front (Dual Piston)
Tools Required
^
J8092 Driver Handle
^
J43885 Boot Seal Installer
Disassembly Procedure
1. Drain all the brake fluid from the caliper.
2. Install a piece of wood or shop towels between the piston and the inside of the brake caliper.
Caution: Refer to Eye Protection Caution in Service Precautions.
Notice: Refer to Safety Glasses and Compressed Air Caution in Service Precautions.