Blazer 2WD V6-4.3L VIN X (2004)
5. Install new seals on the engine oil cooler lines.
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the bolt attaching the engine oil cooler lines to the engine oil filter adapter.
^
Tighten the engine oil filter adapter bolt to 35 Nm (26 ft. lbs.).
7. Install the cooler line clamp and the bolt.
^
Tighten the cooler line clamp bolt to 10 Nm (89 inch lbs.).
8. Lower the vehicle.
9. Inspect and fill the engine oil to the proper level.