Blazer 2WD V6-4.3L VIN X (2004)
Oil Line: Service and Repair
Engine Oil Cooler Hose/Pipe Replacement
Engine Oil Cooler Hose/Pipe Replacement (2WD)
Removal Procedure
1. Raise and the support vehicle. Refer to Vehicle Lifting.
2. Remove the engine oil cooler line clamp bolt.
Important: Have a drain pan ready for the engine oil to drain into.
3. Remove the bolt attaching the engine oil cooler lines to the oil filter adapter.
4. Remove and discard the seals.
5. Lower the vehicle.
6. Remove air cleaner assembly.