Blazer 2WD V6-4.3L VIN X (2004)
3. Remove the clutch plate and hub assembly.
4. Using external snap ring pliers (1), remove the retaining ring (3) from the clutch rotor and bearing assembly.
5. Place J 33023-A on the clutch rotor.
6. Install J 41552 down into the inner circle of slots in the rotor. Turn J 41552 clockwise in the slots to engage the puller tangs with the rotor.
7. Hold J 41552 in place and use a wrench to turn the center forcing screw against J 33023-A to remove the clutch rotor and bearing assembly.
