Blazer 2WD V6-4.3L VIN X (2004)
Low Pressure Sensor / Switch: Service and Repair
AIR CONDITIONING (A/C) LOW PRESSURE SWITCH REPLACEMENT
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Disconnect the A/C low pressure switch electrical connector.
2. Remove the A/C low pressure switch (5) from the accumulator.
INSTALLATION PROCEDURE
1. Install the A/C low pressure switch (5) to the accumulator.
NOTE: Refer to Fastener Notice in Service Precautions. See: Service Precautions/Vehicle Damage Warnings
Tighten
Tighten the A/C low pressure switch to................5 N.m (44 lb in).
2. Connect the A/C low pressure switch electrical connector.
3. Leak test the fittings of the component using the J 39400-A.