Blazer 2WD V6-4.3L VIN X (2004)
16.
Install the new compass mounting bracket.
17.
Install the compass mounting bracket screw.
Tighten
Tighten the screw to 1.9 N.m (17 lb in).
18.
Connect the console electrical connectors.
19.
Insert the console mounting tabs into the mounting bracket and push upward on the rear of the console in order to install the console.
20.
Install the screw at the front of the console.
Tighten
Tighten the screw to 1.9 N.m (17 lb in).
21.
Calibrate the compass.
Parts Information
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer
