Blazer 2WD V6-4.3L VIN X (2004)
Ash Tray Lamp: Service and Repair
ASHTRAY LAMP REPLACEMENT
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Disconnect the battery negative cable.
2. Remove the ash tray housing.
3. Open the ash tray and remove the liner.
4. Remove the bulb and socket assembly from the ash tray housing.
5. Remove the bulb from the socket.
INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Install the bulb and socket assembly to the ash tray housing.
3. Install the ash tray liner.
4. Install the ashtray housing to the instrument panel.
5. Connect the battery negative cable.