Blazer 2WD V6-4.3L VIN X (2004)
4. Loosen the tie rod adjuster clamp bolts at each end to the tie rod adjuster sleeve.
5. Adjust the toe by turning the tie rod adjuster in order to achieve the proper toe specification.
Notice: Refer to Fastener Notice in Service Precautions.
6. Position the tie rod adjuster clamps.
^
Tighten the tie rod adjuster clamp bolts to 21 Nm (16 ft. lbs.).
7. Verify the number of threads showing on the tie rod ends at each side of the adjuster sleeve are equal within three threads.
