Blazer 2WD V6-4.3L VIN X (2004)
1. Install the power steering cooler hose to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Connect the power steering cooler hose to the power steering cooler.
^
Tighten the power steering hose clamp to 2 Nm (18 inch lbs.).
3. Connect the power steering cooler hose to the power steering pump.
^
Tighten the power steering hose clamp to 2 Nm (18 inch lbs.).
4. Remove the drain pan from under the vehicle.
5. Install the air cleaner assembly.
6. Bleed the power steering system.