Blazer 2WD V6-4.3L VIN X (2004)
5. Remove the SIR fuse from the I/P fuse block (1) located in the I/P fuse block.
IMPORTANT: With the SIR fuse removed and the ignition ON, the AIR BAG indicator illuminates. This is normal operation and does not indicate
an SIR system malfunction.
6. Remove the connector position assurance (CPA) from the steering wheel module yellow 2-way connector (1) located left of the steering column
near the knee bolster.
7. Disconnect the steering wheel module yellow 2-way connector (1) located near the knee bolster.
8. Remove the CPA from the I/P module yellow 2-way connector (1) located behind the I/P support.
9. Disconnect the I/P module yellow 2-way connector (1).