Blazer 2WD V6-4.3L VIN X (2004)
Negative: Service and Repair
Disconnect/Connect Procedure
BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE
REMOVAL PROCEDURE
1. Turn off all the lamps and accessories.
2. Turn the ignition OFF.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
3. Remove the battery ground negative cable and bolt from the battery 4.3L.
INSTALLATION PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
NOTE: Refer to Fastener Notice in Service Precautions.
IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.
1. Install the battery ground negative cable and bolt to the battery.
Tighten
Tighten the battery terminal bolt to 15 N.m (11 lb ft).
