chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Underhood Electrical Center or Junction Block Replacement|Page 5466 > < Underhood Electrical Center or Junction Block Replacement|Page 5464

Blazer 2WD V6-4.3L VIN X (2004)

Page 4
background image

Tighten
Tighten the battery positive cable to the underhood electrical center bolt to 10 N.m (89 lb in).

4. Replace the battery positive cable cover.
5. Connect battery negative cable.

Underhood Electrical Center or Junction Block Replacement|Page 5466 > < Underhood Electrical Center or Junction Block Replacement|Page 5464