Blazer 2WD V6-4.3L VIN X (2004)
Power Steering Line/Hose: Service and Repair
Pressure Hose
Power Steering Pressure Hose Replacement
Removal Procedure
Notice: Refer to Power Steering Hose Disconnected.
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the steering linkage shield, if equipped.
3. Install a drain pan under the vehicle.
4. Disconnect the pressure hose from the power steering pump.
5. Lower the vehicle.
6. Remove the air cleaner assembly.
7. Disconnect the power steering gear pressure hose from the power steering gear.
8. Remove the power steering gear pressure hose from the vehicle.
Installation Procedure
Notice: Refer to Installing Hoses Without Twists or Bends.
