Blazer 2WD V6-4.3L VIN X (2004)
11. Remove the torsion bars. Note the exact direction of the forward end and the side of the torsion bar that is being removed.
12. Remove the torsion bar links lower retaining nuts.
13. Remove the torsion bar links from the torsion bar support.
Installation Procedure
1. Install the torsion bar links to the torsion bar support.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the torsion bar links lower retaining nuts.
^
Tighten the torsion bar links lower retaining nuts to 50 Nm (37 ft. lbs.).
