Blazer 2WD V6-4.3L VIN X (2004)
Leaf Spring Bushing: Service and Repair
Spring Bushing Replacement
Removal Procedure
1. Remove the leaf spring from the vehicle.
2. Remove the bushing from the spring assembly. Press the spring bushing from the spring in an arbor press.
3. Clean the spring eye of any remaining parts of the bushing.
4. Remove any burrs from the spring eye that could cause the new bushing to bind when the bushing is installed.
Installation Procedure
1. Apply rubber lubricant to the bushing (1). Apply lubricant to the spring eye (2).