Blazer 2WD V6-4.3L VIN X (2004)
4. Install the wheel hub and bearing to the steering knuckle mounting bolts.
^
Tighten the wheel hub and bearing to the steering knuckle mounting bolts to 105 Nm (77 ft. lbs.).
5. Install the wheel speed sensor to the wheel hub and bearing.
6. Install the wheel speed sensor to the wheel hub and bearing mounting bolt.
^
Tighten the wheel speed sensor to the wheel hub and bearing mounting bolt to 18 Nm (13 ft. lbs.).
7. Install the rotor.
8. Install punch in rotor vanes to hold from turning, 4WD vehicles only.
9. Install the drive axle washer, 4WD vehicles only.
10. Install the drive axle nut, 4WD vehicles only.
^
Tighten the drive axle nut to 140 Nm (103 ft. lbs.).
11. Install the tire and the wheel.
12. Lower the vehicle.
