Blazer 2WD V6-4.3L VIN X (2004)
9. Push the range selector cable grommet up through the floor panel of the vehicle.
10. Lower the vehicle.
11. Remove the console.
12. Remove the front mat and carpet.
13. Ensure that the transmission is in the mechanical neutral position.
14. Disconnect the cable end from the controller ball stud.
15. Remove the retainer securing the cable to the controller.
16. Depress the tangs and remove the cable from the controller.
17. Remove the sound deadening material from the floor panel that covers the cable.
18. Pull the cable up through the opening in the floor panel and remove the cable from the vehicle.