Blazer 2WD V6-4.3L VIN X (2004)
1. Install the new rear axle housing cover gasket and the rear axle housing cover.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the rear axle housing cover bolts.
Tighten the rear axle housing cover bolts in a crosswise pattern to 39 Nm (29 ft. lbs.).
3. Fill the rear axle. Use the proper fluid.
4. Install the rear axle fill plug.
Tighten the rear axle fill plug to 33 Nm (24 ft. lbs.).
5. Lower the vehicle.