Blazer 2WD V6-4.3L VIN X (2004)
Drive/Propeller Shaft: Service and Repair
Propeller Shaft Replacement - Front
Propeller Shaft Replacement - Front
Removal Procedure
Important: Observe the position of all the driveline components. Accurately mark the relationship of the components before removal. These
components include the propeller shafts, the drive axles, the pinion flanges, and the output shafts. Reassemble all components in the exact relationship
to each other as they were before removal. Follow the specifications, the torque values, and any measurements obtained prior to disassembly.
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Accurately reference mark the propeller shaft.
3. Remove the front propeller shaft bolts and yoke clamp from the front drive axle.
4. Remove the propeller shaft from the transfer case.
Installation Procedure