Blazer 2WD V6-4.3L VIN X (2004)
Constant Velocity Joint Boot: Service and Repair
Outer Joint and Seal Replacement
Wheel Drive Shaft Outer Joint and Seal Replacement
Tools Required
^
J35910 Seal Clamp Tool
^
J41048 Swage Clamp Tool
^
J8059 Snap Ring Pliers
Disassembly Procedure
1. Place the halfshaft in a vise.
2. Place protective covers over the vise jaws.
3. Use a hand grinder to cut through the swage rings (2). Do not damage the outer race.
4. Compress the seal on the halfshaft and away from the CV joint outer race (1).
5. Wipe all grease away from the face of the CV joint.