chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Wheel Bearing > < A/T - 4T80E, Slips in Gear/L/H Axle Seal Leaks|Page 4455

Blazer 2WD V6-4.3L VIN X (2004)

Page 2
background image

2. Install the axle shaft seal using the J23771.

Drive the tool into the bore until the axle shaft seal bottoms flush with the tube.

3. Install the axle shaft. 
4. Install the rear axle housing cover. 
5. Install the tire and wheel assembly. 
6. Fill the rear axle. Use the proper fluid. 
7. Lower the vehicle.

Wheel Bearing > < A/T - 4T80E, Slips in Gear/L/H Axle Seal Leaks|Page 4455