Blazer 2WD V6-4.3L VIN X (2004)
Windshield Washer Hose: Service and Repair
Hose - Rear Window - Washer Pump to End Gate
HOSE REPLACEMENT - REAR WINDOW - WASHER PUMP TO END GATE
REMOVAL PROCEDURE
1. Remove the left front seat.
2. Remove the rear seat.
3. Remove the endgate/liftgate door sill plate.
4. Remove the left front and left rear door sill plates.
5. Remove the left body side trim panel.
6. Remove the left hinge pillar trim panel.
7. Fold over the left side of the carpet to allow access to the body harness.
8. Disconnect the washer hose connection (1) from the body harness (2) at the endgate.
9. Remove the air cleaner assembly.
10. Disconnect the hose (1) from the rear washer pump.
11. Install a plug to the rear washer pump nozzle to prevent washer fluid loss.
12. Push the hose grommet (2) in through the bulkhead.
