Blazer 2WD V6-4.3L VIN X (2004)
Wiper Arm: Service and Repair
Wiper Arm Replacement
WIPER ARM REPLACEMENT
REMOVAL PROCEDURE
1. Mark the wiper park position on the windshield with a suitable non-permanent marker.
2. Remove the cover from the wiper arm nut.
3. Remove the wiper arm retaining nut.
4. Remove the wiper arm from the wiper transmission drive shaft.
INSTALLATION PROCEDURE
1. Install the wiper arm onto the wiper transmission drive shaft.
1.1.
Align the wiper arm with the marks made on the windshield.
1.2.
Push the wiper arm down onto the wiper transmission drive shaft completely.
NOTE: Refer to Fastener Notice in Service Precautions.
