Blazer 4WD V6-4.3L VIN X (2005)
Trim Panel: Service and Repair
Garnish Molding Replacement - Side Door Lock Pillar (With RPO Code CF5)
GARNISH MOLDING REPLACEMENT - SIDE DOOR LOCK PILLAR (With RPO Code CF5)
REMOVAL PROCEDURE
1. Remove the front and rear door sill trim plates.
2. Remove the upper and lower front seat belt anchor bolts.
3. Remove the front side door lock pillar garnish molding from the vehicle. Feed the seat belt through the garnish molding.
INSTALLATION PROCEDURE
1. Install the front side door lock pillar garnish molding to the vehicle. Feed the seat belt through the garnish molding.
2. Install the upper and the lower front seat belt anchor bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 70 N.m (52 lb ft).
3. Install the front and the rear door sill trim plates.
