Blazer 4WD V6-4.3L VIN X (2005)
Sunroof / Moonroof Wiring Harness: Service and Repair
SUNROOF WIRING HARNESS REPLACEMENT (CF5)
REMOVAL PROCEDURE
1. Remove the negative battery cable.
2. Remove the headliner.
3. Disconnect the wiring harness from the sunroof module (2).
4. Remove the rosebud clips securing the dome lamp/sunroof harness to the left front side door opening frame.
5. Remove the tape securing the sunroof harness to the dome lamp harness
6. Disconnect the wiring harness from the body wiring harness.
7. Remove the wiring harness from the vehicle.
INSTALLATION PROCEDURE
1. Install the wiring harness to the dome lamp harness by wrapping the harnesses with electrical tape.
2. Install the wiring harness rosebud clips to the left front side door opening frame.
3. Connect the wiring harness from the body wiring harness.
4. Connect the wiring harness from the sunroof module (2).
5. Install the headliner.
6. Install the negative battery cable.
