Blazer 4WD V6-4.3L VIN X (2005)
10. Remove the 2 bolts (1) from the seat back pivot assembly.
11. Remove the cable cover bracket (2).
12. Remove the cable (3) from the bracket (1) by loosening cable nut (2).
13. Remove cable (3).
Installation Procedure
1. Install the cable (3) through the hole (2) in the seat adjuster rail.
2. Hook the cable (3) into the rail and clip the cable to the rail (1).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the seat adjuster rail to the seat frame with 2 nuts (1).
Tighten the bolts to 24 N.m (18 lb ft)
