Blazer 4WD V6-4.3L VIN X (2005)
4. Install the cable (3) to the seat back pivot assembly.
5. Install the cable (3) to the pivot assembly bracket by tightening cable nut (2).
6. Install the cable cover bracket (2) to the seat back pivot assembly.
7. Install the 2 bolts (1).
Tighten the bolts to 24 N.m (18 lb ft)
8. Pull the pad and cover back over the seat frame.
9. Install the pad and cover to seat with J-strips (1).
10. Install the spring (2) to the seat adjuster rail.
11. Install the seat back recliner handle.
12. Install seat in the vehicle.
Seat Back Filler Panel Replacement - Rear
Seat Back Filler Panel Replacement - Rear
Removal Procedure
1. Fold down the rear seat to access the rear seatback filler panel retaining nuts.
2. Remove the rear seatback filler panel retaining nuts.
3. Remove the rear seatback filler panel.
Installation Procedure