Blazer 4WD V6-4.3L VIN X (2005)
Brake Caliper: Service and Repair
Brake Caliper Replacement - Front (Single Piston)
Brake Caliper Replacement - Front (Single Piston)
Removal Procedure
1. Inspect the fluid level in the brake master cylinder reservoir.
2. If the brake fluid level is midway between the maximum full point and the minimum allowable level, no brake fluid needs to be removed from the
reservoir before proceeding.
3. If the brake fluid level is higher than midway between the maximum full point and the minimum allowable level, using an appropriate tool, remove
the brake fluid to the midway point before proceeding.
4. Raise the vehicle. Refer to Vehicle Lifting.
5. Remove the tire and wheel assembly.
6. Compress the front caliper piston.
