Blazer 4WD V6-4.3L VIN X (2005)
6. Install the brake caliper bolts.
Tighten the brake caliper bolts to 31 Nm (23 ft. lbs.).
7. Install the NEW metal (copper) gaskets to the brake hope and the bolt.
Notice: Refer to Brake Hose Installation Notice in Service Precautions.
8. Install the rear brake hose bolt.
Tighten the brake hose bolt to 44 Nm (33 ft. lbs.).
9. Bleed the hydraulic brake system.
10. Install the tire and wheel assembly.
11. Lower the vehicle. Refer to Vehicle Lifting.
