Blazer 4WD V6-4.3L VIN X (2005)
Radiator Hose: Service and Repair
Radiator Hose Replacement - Inlet
Radiator Hose Replacement - Inlet (4.3L)
^
Tools Required
-
J 38185 Hose Clamp Pliers
Removal Procedure
1. Remove the air cleaner outlet duct.
2. Partially drain the cooling system. Refer to Draining and Filling Cooling System.
3. Remove the radiator inlet hose from the radiator support.
4. Using the J 38185, reposition the radiator inlet hose clamp from the radiator.
5. Reposition the radiator inlet hose from the radiator.
6. Using the J 38185, reposition the radiator inlet hose clamp from the coolant outlet.
7. Reposition the radiator inlet hose from the coolant outlet.
8. Remove the radiator inlet hose.
Installation Procedure
1. Install the radiator inlet hose to the coolant outlet.
2. Using the J 38185, reposition the radiator inlet hose clamp to the coolant outlet.
