Blazer 4WD V6-4.3L VIN X (2005)
1. Sub-assemble the engine mount, shield, and one bolt.
2. Install the engine mount and shield to the engine.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the engine mount to engine bolts.
^
Tighten the engine mount to engine bolts to 55 Nm (41 ft. lbs.).
4. Install the engine mount frame bracket to the frame.
5. Install the engine mount frame bracket bolts.
^
Tighten the engine mount frame bracket bolts to 45 Nm (33 ft. lbs.).
6. Lower the engine.
7. Install the left hand exhaust manifold.
8. Install the engine mount through-bolts and nuts.
^
Tighten the through-bolts to 74 Nm (55 ft. lbs.).
^
Tighten the nuts to 63 Nm (46 ft. lbs.).
9. Install the underbody shields, if equipped.
10. Lower the vehicle.
