Blazer 4WD V6-4.3L VIN X (2005)
10. Inspect the fittings, the connectors, the cooler lines, the cooler, the filter lines, and the remote filter adapter for damage, distortion, or restriction.
Replace parts as necessary.
11. Flush the engine oil cooler, the engine oil cooler lines, the remote engine oil filter adapter, and the remote engine oil filter lines with the same type
of engine oil normally circulating through the engine.
Installation Procedure
1. Install new seals on both ends of the engine oil cooler line.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the engine oil cooler line mounting bolt to the remote oil filter adapter.
^
Tighten the bolt to 35 Nm (26 ft. lbs.).
3. Install the engine oil cooler mounting bolt to the engine.
^
Tighten the bolt to 35 Nm (26 ft. lbs.).
