Blazer 4WD V6-4.3L VIN X (2005)
Oil Filter: Service and Repair
Engine Oil and Oil Filter Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the oil pan drain plug and drain the engine oil into a suitable container.
3. For 2WD vehicles, remove the oil filter from the oil filter adapter.
4. For 4WD vehicles, open the access panel in the steering linkage shield.
5. Remove the oil filter from the remote oil filter adapter.
6. Inspect to ensure the engine oil filter gasket is removed.
Installation Procedure