Blazer 4WD V6-4.3L VIN X (2005)
Four Wheel Drive Selector Switch: Service and Repair
NVG 236-NP8 Transfer Case
Transfer Case Shift Control Switch Replacement
Removal Procedure
1. Insert a pocket crew driver between the control switch and the instrument panel.
2. Using light pressure, pry the control switch from the instrument panel.
3. Remove the control switch from the instrument panel.
4. Remove the electrical connectors from the control switch.
Installation Procedure
1. Important: When installing the control switch, a snap should be felt or heard when it is properly seated.
Install the electrical connectors in the transfer case control switch.
2. Install the automatic transfer case switch into the instrument panel.
