Blazer 4WD V6-4.3L VIN X (2005)
2. Install the CPA to the inflatable restraints front end discriminating sensor connectors.
3. Install the SIR fuse into the I/P fuse block (1) located in the I/P fuse block.
4. Staying well away from all air bags, turn ON the ignition, with the engine OFF.
1. The AIR BAG indicator will flash 7 times.
2. The AIR BAG indicator will then turn OFF.
5. Perform the Diagnostic System Check - Vehicle in Vehicle DTC Information, if the AIR BAG indicator does not operate as described.
