Blazer 4WD V6-4.3L VIN X (2005)
3. Install the relay rod ball stud to the pitman arm. Ensure that the seal is on the stud.
4. Install the new nut to the pitman arm ball stud at the relay rod.
^
Tighten the pitman arm ball stud nut to 83 Nm (61 ft. lbs.).
5. Connect the steering shock absorber to the relay rod.
6. Install the steering shock absorber ball stud nut at the relay rod.
^
Tighten the steering shock absorber ball stud nut to 63 Nm (46 ft. lbs.).
7. Install the inner tie rod ball studs to the relay rod. Ensure the seal is on the stud.
8. Install the new nuts to the inner tie rod ball studs at the relay rod.
^
Tighten the inner tie rod ball stud nuts to 47 Nm (35 ft. lbs.).
