Blazer 4WD V6-4.3L VIN X (2005)
Tow/Haul Switch: Testing and Inspection
Tow/Haul Switch/Indicator Always On or Inoperative
Circuit Description
Tow/haul mode enables the operator to achieve enhanced shift performance when towing or hauling a load. When tow/haul mode is selected, the
tow/haul switch input signal to the body control module (BCM) is momentarily toggled to zero volts. This signals the powertrain control module
(PCM) to extend the length of time between upshifts and increase transmission line pressure. Cycling the tow/haul switch again disables tow/haul
mode and returns the transmission to a normal shift pattern.
Diagnostic Aids
Inspect the connectors at the BCM, and all other circuit connecting points for an intermittent condition.
Inspect the circuit wiring for an intermittent condition.
If the electrical circuit checks are OK and the tow/haul shift pattern is not occurring, there may be a mechanical/hydraulic condition that prevents
tow/haul operation. Refer to Symptoms - Automatic Transmission.
