chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Transmission Mount, A/T|Service and Repair|Page 3720 > < Tow/Haul Switch <--> [Transmission Mode Switch, A/T]|Diagrams|Page 3716

Blazer 4WD V6-4.3L VIN X (2005)

Page 1
background image

Transmission Mount: Service and Repair

Transmission Mount Replacement

 
Removal Procedure

1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the transmission mount shield bolts, if equipped.
3. Remove the transmission mount shield, if equipped.

4. Support the transmission with a transmission jack.
5. Remove the transmission mount to the transmission support retaining nut or nuts.
6. Remove the transmission mount shield bracket, if equipped.

7. Raise the transmission to take the weight off of the mount.
8. Remove the transmission mount to the transmission or transfer case adapter mounting bolts (1).
9. Raise the transmission just enough to remove the transmission mount.

10. Remove the transmission mount from the vehicle.

Installation Procedure

Transmission Mount, A/T|Service and Repair|Page 3720 > < Tow/Haul Switch <--> [Transmission Mode Switch, A/T]|Diagrams|Page 3716