Blazer 4WD V6-4.3L VIN X (2005)
Clutch Slave Cylinder: Service and Repair
Clutch Concentric Actuator Cylinder Replacement
Removal Procedure
1. Remove the transmission.
2. Remove the 2 bolts securing the concentric actuator cylinder to the clutch housing.
3. Remove the actuator cylinder from the transmission input shaft. If required, the bearing can be removed from the actuator cylinder for
replacement.
Installation Procedure
1. Position the actuator cylinder to the transmission input shaft. Ensure that the bleed screw and the coupling are positioned toward the transmission
ports.
2. Notice: Refer to Fastener Notice in Service Precautions.
Secure the concentric actuator cylinder to the clutch housing with 2 bolts.
^
Tighten the bolts to 8 Nm (71 inch lbs.).
3. Install the transmission.