Blazer 4WD V6-4.3L VIN X (2005)
Axle Shaft: Service and Repair
Wheel Drive Shaft Replacement
Wheel Drive Shaft Replacement
Removal Procedure
1. Unlock the steering column so that the steering linkage is free to move.
2. Raise the vehicle. Support the vehicle with suitable safety stands. Refer to Vehicle Lifting.
3. Remove the two front tire and wheel assembly.
4. In order to prevent the drive axle from turning, insert a drift through the brake caliper and into one of the rotor vanes.
5. Remove the axle nut and washer.