Blazer 4WD V6-4.3L VIN X (2005)
Windshield Washer Switch: Service and Repair
WIPER/WASHER SWITCH REPLACEMENT - REAR
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
2. Use a flat-bladed tool in order to pry the switch away from the instrument panel.
3. Disconnect the electrical connectors as necessary.
INSTALLATION PROCEDURE
1. Connect the electrical connectors as necessary.
2. Install the switch to the instrument panel.
3. Connect the negative battery cable.