Blazer 4WD V6-4.3L VIN X (2005)
Wiper Gear Box: Service and Repair
WIPER TRANSMISSION REPLACEMENT
TOOLS REQUIRED
-
J 39232 Wiper Transmission Separator
-
J 39529 Wiper Transmission Installer
REMOVAL PROCEDURE
1. Remove the wiper arms.
2. Remove the air inlet grille panel.
3. Remove the transmission drive link from the wiper motor crank arm using the J 39232 .
4. Remove the transmission screws.
5. Remove the transmission from the vehicle through the access openings in the top of the cowl.
INSTALLATION PROCEDURE
1. Install the transmission to the vehicle.
2. Install the transmission mounting screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the wiper transmission mounting screws to 8 N.m (70 lb in).
