chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Camshaft, Lifters and Push Rods > < Wheel Seal - Revised|Page 1221
Page 1
background image

Compression Check: Specifications

Minimum, 698 kPa (100 psi) @ 200 rpm. 
The lowest cylinder reading should not be less than 80% of the highest. Perform compression test with engine at normal operating temperature, spark
plugs removed and throttle wide open.

Camshaft, Lifters and Push Rods > < Wheel Seal - Revised|Page 1221