chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Output Shaft, A/T > < A/T - 1-2 or 2-3 Slip/Flare, Launch Shudder & DTC P1870|Page 5858
Page 1
background image

Governor: Service and Repair

1. Raise and support vehicle
2. Remove governor cover from case using extreme care not to damage cover. If cover is damaged, it should be replaced.
3. Remove governor.
4. Reverse procedure to install and check fluid level.

Output Shaft, A/T > < A/T - 1-2 or 2-3 Slip/Flare, Launch Shudder & DTC P1870|Page 5858