chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Sunroof / Moonroof Wiring Harness > < Sunroof / Moonroof Module|Diagrams|Page 13650
Page 1
background image

Sunroof / Moonroof Panel: Service and Repair

SUNROOF GLASS PANEL REPLACEMENT

REMOVAL PROCEDURE

1. Pull back the sunshade.
2. Set the sunroof in the closed position.
3. From inside of the vehicle remove the 4 glass panel adjustment screws.
4. From inside of the vehicle push up on the sunroof glass panel so that the glass panel can be grabbed and lifted from the roof opening.
5. Remove the glass panel from the roof opening.

INSTALLATION PROCEDURE

1. Ensure the glass panel mechanism is in the closed position.
2. From outside the vehicle, carefully place the glass panel onto the mechanism.
3. Loosely install the 4 adjustment screws.

IMPORTANT:  Required position of the glass panel is when the front and rear of the sunroof glass panel is flushed with the roof panel.

4. Align the glass panel. Refer to Sunroof Glass Height and Opening Fit Adjustment.
5. Inspect the operation of the sunroof.

Sunroof / Moonroof Wiring Harness > < Sunroof / Moonroof Module|Diagrams|Page 13650