C 1500 Suburban 2WD V8-4.8L VIN V (2002)
10. Remove the park brake lever mounting nuts.
11. Disconnect the front park brake cable from the park brake lever.
12. Remove the park brake lever.
Installation Procedure
1. Connect the front park brake cable to the park brake lever.
2. Install the park brake lever.
3. Install the MID-Bussed Electrical Center bracket.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the park brake lever mounting nuts.
Tighten the nuts to 25 Nm (18 ft. lbs.).
5. Raise the vehicle.
6. Support the vehicle with safety stands.
7. Tighten the nut to the intermediate cable at the equalizer.
Tighten the nut to 3.5 Nm (31 inch lbs.).
