chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Sensors and Switches - Cooling System > < Radiator Hose Replacement - Inlet|Page 4101
Page 3
background image

6. Install the radiator inlet hose clip to the outlet duct.
7. Tighten the air cleaner outlet duct clamps at the following locations:

-

Throttle body

-

MAF/IAT sensor 

-

Tighten the air cleaner outlet duct clamp screws to 7 Nm (62 inch lbs.).

8. Fill the cooling system. Refer to Draining and Filling Cooling System.

Sensors and Switches - Cooling System > < Radiator Hose Replacement - Inlet|Page 4101